magnifier
Language
  • English
  • German
Currency

Zoom the image with the mouse

XR2206 Function Signal Generator DIY Kit Sine Output 1HZ-1MHZ + acrylic case USA

In stock
Business & Industrial:Test, Measurement & Inspection:Signal Sources & Conditioning:Signal Generators
Description : Voltage Supply: 9-12V DC Input Waveforms: Square, Sine & Triangle Impedance: 600 Ohm + 10% Frequency: 1Hz – 1MHz SINE WAVE Amplitude: 0 – 3V at 9V DC input Distortion: Less than...
$9.63
$9.63
  customers are viewing this product
Description :
Voltage Supply: 9-12V DC Input
Waveforms: Square, Sine & Triangle
Impedance: 600 Ohm + 10%
Frequency: 1Hz – 1MHz
SINE WAVE
Amplitude: 0 – 3V at 9V DC input
Distortion: Less than 1% (at 1kHz)
Flatness: +0.05dB 1Hz – 100kHz
SQUARE WAVE
Amplitude: 8V (no load) at 9V DC input
Rise Time: Less than 50ns (at 1kHz)
Fall Time: Less than 30ns (at 1kHz)
Symmetry: Less than 5% (at 1kHz)
TRIANGLE WAVE
Amplitude: 0 – 3V at 9V DC input
Linearity: Less than 1% (up to 100kHz) 10mA

The Function Generator component parameter table 

Note

label

type

parameters

R1

resistor

1K

Regardless of the polarity

R2

Adjustable resistance

B503=50K

(by screen printing layer)

R3, R5,R6

resistor

5.1K

Regardless of the polarity

R4

resistor

330

Regardless of the polarity

R7

Adjustable resistance

B503=50K

(by screen printing layer)

R8

Adjustable resistance

B104=100K

(by screen printing layer)

C1,

Electrolytic capacitor

100UF

The positive short feet negative long feet

C2

non-polar capacitors

104

Regardless of the polarity

C3,C4

Electrolytic capacitor

10UF

The positive short feet negative long feet

C5

non-polar capacitors

105

Regardless of the polarity

C6

non-polar capacitors

473

Regardless of the polarity

C7

non-polar capacitors

222

Regardless of the polarity

C8

non-polar capacitors

101

Regardless of the polarity

U1

IC

XR2206

(by screen printing layer)

JK1

DC POWER

 

(by screen printing layer)

J1

2PIN Jumper cap

XM2.54

Regardless of the polarity

J2

2PIN Jumper cap

XM2.54

Regardless of the polarity

P1

Signal wire terminal

 

(by screen printing layer)

J3

2*5P Jumper cap

 

 

 

The welding installation considerations, follow these steps:

1. The components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.

2.Welding IC socket, terminal blocks, finally power socket, adjustable potentiometer.

3.The back with a diagonal cutting pliers to cut short the pins as far as possible

Debugging steps:

1. After completion of welding on IC, XR2206, pay attention to the direction of IC, insert the might damage the chip!

2. check the IC whether against, such as anti please timely correction.

3. Insert the power supply, power supply for 5.5 * 2.1 port, inside outside is negative polarity. For 9-12 v power supply voltage. The waveform may not be stable for more than 12 v

Using 

1. J1 jumper cap plug in, SIN/TRI blue terminals output sine wave (note J1, J2 can only insert one of)

2. J2 jumper cap plug in, SIN/TRI blue terminals output triangular wave (note J1, J2 can only insert one of)

3. SQU blue terminals output pulse

4. AMP : Sine wave, triangle wave amplitude adjustment

5. FINE : Frequency fine adjustment

6. Coarse : Frequency of coarse adjustment

Package Included:
1 x XR2206 Function Generator DIY Kit Sine, Triangle, Square Output 1HZ-1MHZ (soldering required)
1 x Acrylic case
1 x Schematic diagram

Technical Support is NOT included.
This product is DIY kit, NOT the end product! 
We don't provide technical assistance please make sure that you are familiar with the product before purchasing.

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the 'Complete Orders' link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

You have successfully subscribed!